Before dispatch
Agree packed dimensions, inspection photos or video, included accessories and loading requirements.
Redemption & skill / Commercial equipment
Knockdown Target Ball Toss
Throw at visible targets. Check the play lane, reset cycle and cabinet version.
Knockdown Target Ball Toss
01 / 12
Supplier-listed cabinet
304.8 × 114.3 × 279.4 cm
Source-listed order; confirm axis orientation for installation.Model presentation. Confirm your ordered version in the quote.
A closer look at this model
A physical target game, planned around throwing space.
The target ball toss game uses physical clown targets at the far end of a netted throwing lane. The manufacturer reference turns a familiar ball-toss action into a scored redemption game. It is a useful format to assess when your equipment mix needs a visible target challenge. The first procurement decision is the exact cabinet version. Review the roof and marquee shown in the offer alongside the model plate and dimensions. A single cabinet, a paired installation and a low-roof option must each have their own confirmed layout. Confirm the supplied version, dimensions and included configuration in the quotation. Brand and function customization is typically available for orders of around 10–20 machines. Share your artwork, required function changes, quantity for each selected model and destination. Scope, cost and production schedule are confirmed in the quotation. Standard-machine enquiries for smaller quantities are welcome.
Model highlights
The manufacturer describes ball throwing at physical clown targets; successful knockdowns add points.
The reference has a long netted lane, tiered targets, a front ball tray and a striped canopy.
Side-by-side competition uses an additional cabinet; a shared marquee is a separate configuration to confirm.
Compare current and historical source dimensions before setting the delivered cabinet height in a floor plan.
Brand and function customization is typically available for orders of around 10–20 machines. Confirm requested changes, quantity for each model, cost and schedule in the quotation.
Target acceptance: use the agreed balls to demonstrate each target registering a hit, falling and resetting fully. Agree the test sequence and record missed detections or incomplete resets.
Ball circulation: run successive complete plays and check for trapped balls. Agree the test duration and acceptance criteria; no endurance result is claimed.
Containment and access: review the net panels, front posts, accessible edges and service openings on the quoted build. Keep passing traffic out of the throwing approach.
Payment and rewards: demonstrate credit-to-play, scoring and the selected ticket or free-game sequence. Match the operator menu and test record to the supplied configuration.
Ball stock: the manufacturer recommends 20 balls in play. Confirm material, size, active quantity, included spares and replacement supply for the ordered unit.
Service and spares: request part references and access instructions for targets, reset components, lighting and ball return. Agree warranty, support responsibilities and spare-parts freight.
Packing: request separate main, rear and any marquee packing details, largest packed size, individual gross weights, protection, lifting points and assembly instructions.
Receiving: plan the route from unloading point to the final bay. The assembled cabinet footprint is not a doorway measurement; confirm each packed section and handling method.
Shipment evidence: request packing photographs identifying the shipment, its serial-number record, packing list and agreed acceptance video before dispatch.
Cost and schedule: separate equipment, confirmed options, consumables, spares, packing, freight and local installation. Agree currency, taxes, warranty, payment milestones and current lead time.
Comparison: this format aims directly at standing targets. Compare throwing space, containment and reset servicing with bounce-board condition and tile detection in a bounce-tile game.
Your model checklist
Start with the right fit.
Start with the manufacturer web envelope of 120 L × 45 W × 110 H in. The older manufacturer dimensions sheet lists 112 in height, so resolve the revision before final ceiling and delivery-route planning. Add a separately agreed throwing position, queue and service access. A floor plan should keep passing traffic out of the throwing approach.
Game sequence and reward configuration
Confirm game sequence and reward configuration for the exact configuration in your quotation.
Consumables, sensors and service access
Confirm consumables, sensors and service access for the exact configuration in your quotation.
Player space and local operating requirements
Confirm player space and local operating requirements for the exact configuration in your quotation.
01The machine, up close
See how it works.
3 views
01The machine, up close
See how it works.
Which single-cabinet layout should match the quotation?
Source-based single-cabinet illustration; supplied configuration to confirm.
304.8 × 114.3 × 279.4 cm
How will every target hit and complete reset be demonstrated?
Three rows of visible targets; request hit detection and complete-reset evidence.
304.8 × 114.3 × 279.4 cm
Where are the score display and ball tray on this version?
Illustrative close-up of the player deck and ball tray; printed artwork and display settings are confirmed for the quoted build.
304.8 × 114.3 × 279.4 cm
02Plan its place
Match the space and the setup.
4 views
02Plan its place
Match the space and the setup.
How will the 110/112 in height revision difference be resolved?
Supplier-listed cabinet
304.8 × 114.3 × 279.4 cm
Source-listed order; confirm axis orientation for installation.Allow separately for operating access, refilling and the delivery route. Packed size is confirmed in the quotation.
View reference specificationsWhere should the throwing approach and queue be placed?
Illustrative arcade setting with an adult player at the open throwing end; not a completed customer installation.
304.8 × 114.3 × 279.4 cm
How can waiting players remain outside the throwing approach?
Illustrative social setting with one adult taking a ball and a companion waiting beside the cabinet; not a completed customer installation.
304.8 × 114.3 × 279.4 cm
How does the cabinet fit a social venue with clear circulation?
Illustrative social setting; not a completed customer installation.
304.8 × 114.3 × 279.4 cm
03From model to order
Build a clear quotation.
1 view
03From model to order
Build a clear quotation.
What destination, quantity, access, power and configuration should the quote cover?
Send destination, quantity, access, power and configuration requirements for quotation.
304.8 × 114.3 × 279.4 cm
04More model details
Explore the configuration.
3 views
04More model details
Explore the configuration.
Which netting and frame details should the supplied drawing confirm?
Exterior close-up concept; exact net attachment details remain unverified.
304.8 × 114.3 × 279.4 cm
Which target, ball-return and containment checks should acceptance include?
Unperformed checklist for target reset, ball return, netting and serial-matched evidence.
304.8 × 114.3 × 279.4 cm
Which branding and function changes, quantity per model, cost and schedule are required?
Brand and function customization is typically available around 10–20 units; project scope, cost and schedule to confirm.
304.8 × 114.3 × 279.4 cm
Brand & function customization
Your machine.
Your direction.
Brand and function customization is typically available for orders of around 10–20 machines.
Supplier-listed cabinet
304.8 × 114.3 × 279.4 cm
Source-listed order; confirm axis orientation for installation.Branding direction. Final artwork and configuration are approved for your order.
Build your quote brief
What does your venue need?
Knockdown Target Ball Toss
Standard finish · 1–5 machines
Start from an existing machine design. Share the quantity for each model and required function changes. Available options, customization costs and production schedule are confirmed for your selected model and destination.
Before you commit
Specifications & order details.
From the floor plan to the freight quote.
Make the next decision with the right information.
Start with the source values
Key supplier specifications.
Supplier reference: Knockdown Target Ball Toss
- Cabinet dimensions — current manufacturer page
- 120 L × 45 W × 110 H in. Arithmetic conversion: 304.8 × 114.3 × 279.4 cm; not independently measured.
- Height revision conflict
- The manufacturer dimensions sheet Rev11.22 lists 112 in, while the current page lists 110 in. Exact supplied revision is unconfirmed.
- Weight — current manufacturer page
- 557 lb listed; confirm net weight for the offered build.
- Game format
- knockdown target ball toss reference; physical target ball toss.
Reference data. Confirm the final dimensions, power supply, payment setup and model before ordering.
Full supplier specifications12 source fields
- Game format
- knockdown target ball toss reference; physical target ball toss.
- Cabinet dimensions — current manufacturer page
- 120 L × 45 W × 110 H in. Arithmetic conversion: 304.8 × 114.3 × 279.4 cm; not independently measured.
- Height revision conflict
- The manufacturer dimensions sheet Rev11.22 lists 112 in, while the current page lists 110 in. Exact supplied revision is unconfirmed.
- Weight — current manufacturer page
- 557 lb listed; confirm net weight for the offered build.
- Electrical values — source conflict
- Current page: 110 V / 2.5 A or 220 V / 2.5 A. Rev11.22 sheet: 110 V / 5 A or 220 V / 2.5 A. Verify the rating plate and regional input.
- Packing — current manufacturer page
- Main: 96 × 48 × 70 in, 620 lb. Rear: 30 × 48 × 90 in, 324 lb. Confirm shipment components and totals in the actual packing list.
- Ball stock — manufacturer recommendation
- 20 balls in the game. Confirm the supplied ball specification, active quantity and separate replacement stock.
- Roof and paired variants
- Current page mentions a 90 in flat-roof option. Paired marquee height statements differ within the page; do not apply single-unit data to a pair.
- Payment and ticket configuration
- Coin mechanism, ticket format, cashless reader and play-to-win-free-game options require exact-build confirmation.
- Installation envelope
- Published cabinet size excludes any verified throwing, queue and service clearances.
- Supplied-unit identity
- Confirm the supplied cabinet version, included configuration and dimensions in the quotation before final site planning.
- Customization
- Brand and function customization is typically available for orders of around 10–20 units. Scope, quantity for each model, cost and schedule are confirmed for the project. Smaller standard-machine enquiries are welcome.
Confirm for your project.
Review these model questions with your venue, destination and order scope.
Space & installation1 question
- What are the measured roof height and separate player, queue and service clearances?
Operation & consumables5 questions
- Does every clown target register a hit, reset fully and remain upright through the agreed demonstration?
- Which ball material, size, active quantity and spare quantity are included?
- How does the ball return behave during successive complete plays?
- Which payment reader, coin specification and ticket or free-game configuration will be tested?
- Which target, reset, lighting and ball-return spare parts can be quoted with part numbers?
Market & configuration1 question
- Which rating plate, voltage, frequency, plug and current value apply to this unit?
Order & delivery3 questions
- Which cabinet sections ship separately and what is the largest packed piece?
- Which packing photographs, serial-number record and acceptance video will identify the shipped unit?
- Which branding or function changes are required, and how many units of each selected model should the customization quotation cover?
Other model confirmations2 questions
- Which manufacturer, model plate and cabinet revision identify the offered unit?
- Is the quote for one cabinet, two cabinets with a marquee, or a flat-roof version?
To your destination
Share your country and port. Separate freight, duties, local delivery and unloading in the agreed shipping terms.
Once it arrives
Confirm warranty coverage, spare parts, troubleshooting, parts freight and local labor before paying a deposit.
CONFIDENCE BEFORE COMMITMENT
The right machine.
The right paperwork.
Buying for another country? Request the documents for your exact model and configuration, so you can review them before placing an order.
YOUR PRE-ORDER DOCUMENT PACKKnow what you’re buying.
Know what you’re buying.
Know what to ask for.
Send the model, destination country and any requirements from your importer. We’ll confirm which supplier documents are available for the quoted machine.
Request my model’s documents- Model & configurationMatch the model reference, power supply and selected options to the available technical file.
- Destination requirementsReview applicable declarations, test reports and certificates with your importer before shipment.
- Setup & ongoing supportRequest operating instructions, a spare-parts list and the agreed support and warranty terms.
Documents apply to the model and scope shown. Final configuration and destination requirements are confirmed with your quotation.
Is one cabinet a complete two-player installation?
The manufacturer describes competition using a second cabinet. Specify one cabinet or a paired installation and identify the marquee separately; do not infer that a single quoted cabinet includes a second play lane.
Will it fit under a 110 in ceiling?
The current page lists 110 in overall height and an older official sheet lists 112 in. A ceiling exactly equal to one source value leaves no confirmed installation margin. Obtain measured dimensions for the quoted roof and marquee configuration.
What should the demonstration prove?
Ask for target detection, complete reset, ball return and the selected payment and ticket sequence. Agree the number of plays and acceptance criteria before testing. A promotional gameplay clip does not document these checks.
What should be included in the quotation request?
Send the cabinet count, roof or marquee requirement, floor-plan dimensions, destination, electrical supply, payment reader and ticket format. Request a split between equipment, spares, packing, freight and any local installation responsibilities.
Can you customize both the branding and the functions?
Yes. Brand and function customization is typically available for orders of around 10–20 machines. Provide artwork and required function changes so the supported scope, cost and schedule can be confirmed before production.
How many machines do I need for a customized order?
Around 10–20 machines is a typical customization project quantity, not a fixed minimum for standard machines. Include the quantity for each selected model so the project can be reviewed; mixed-model eligibility needs confirmation.
Warehouse crating
Agree the crate, protection and packed dimensions for your equipment.
Loading at origin
Plan how the packed machine will be handled and loaded.
Ocean freight
Define the freight route, documents and destination charges in your quote.
Destination unloading
Confirm unloading access, handling equipment and local responsibilities.
Visual references, not shipment records. Packing and delivery are agreed in your quotation.
BUILT AROUND YOUR ORDER
From model to delivery.
We bring your Knockdown Target Ball Toss configuration, custom requirements and delivery scope into one equipment proposal.
- 01Model & configuration
Confirm the build, branding and local setup.
- 02Packing & route
Agree packed measurements and the shipping scope.
- 03Handover & support
Review unloading, available manuals and spare parts.
From shortlist to quotation
Let’s build your quote.
Tell us where it’s going. We’ll review the machine, your selected options and the shipping scope.
Knockdown Target Ball Toss1–5 machinesStandard finishDiscuss with meConfirm for my marketEdit configuration
