Is this a maximum-strength hammer game?

The source describes controlling a light into a win zone with a foam mallet and sensor pad. Frame the inspection around controllable response and the selected settings; this reference does not establish a force measurement.

Why use 108 inches rather than the other listed height?

The official 9-foot configuration image was matched to this reference. The 11-foot cabinet is listed separately at 132 inches. Confirm the selected assembled height, tower components and receiving route for the offered unit.

Is 449 or 460 lb the machine weight?

Those figures are boxed shipping weights in the source, for the 9-foot and separate 11-foot reference configurations. Net assembled weight remains unknown. Request the actual package sizes, gross weights, handling points and assembly responsibilities for the quoted shipment.

What should accompany an exact-model enquiry?

Send the reference image, selected height, required quantity, destination, venue access limits and preferred configuration. Request model and rating-plate photographs, a matched working demonstration, actual packing details and separately stated payment, support and freight terms.

How many machines do I need for a customized order?

Brand and function customization is typically available for orders of around 10–20 machines using access to existing tooling for these machine types. This is not a fixed minimum order. Send the quantity for each selected model and the changes you need; no mixed-model threshold is assumed. Standard-machine and smaller-quantity enquiries are welcome.

Can you customize both the branding and the functions?

We can work with you on branding and function changes. Send your selected machine or reference image, planned quantity per model, destination, artwork and required functions. Supported changes, cost, schedule and acceptance checks are confirmed in the quotation; modified functions are not represented as already built or tested.

Redemption & skill / Commercial equipment

Precision Hammer Light Target

Precision Hammer Light Target — source-specific reference configuration

Match the 9-foot tower and test controlled force at the sensor pad.

01 / 12

Model presentation. Confirm your ordered version in the quote.

Reaction & memory gamesConfiguration quotation

Assembled dimensions — reference: 53 × 45 × 108 in (L/W/H). Supplier-stated; excludes unverified operating clearances.
Net weight — source status: The source does not state net assembled weight. Request exact-unit weight separately from boxed shipping weight.
Reference configuration — source: Precision Hammer Light Target — 9ft reference; 11ft separate

Request a quote No payment required · Quantity-based quotation

Build your configuration brief

View specifications

A closer look at this model

Match the 9-foot tower and test controlled force at the sensor pad.

Precision Hammer Light Target asks the player to tap a sensor pad with a foam mallet and place the moving light in a target zone. The purchase question is how the sensor translates a controlled tap into the light result. A description of brute-force strength testing would misstate this reference gameplay. The selected illustration represents the single 9-foot reference: a barrel pedestal, a narrow light tower, four colored round panels and two rectangular display windows. The supplier-listed reference height is 108 inches (274.32 cm). Confirm the offered configuration in the quotation; the 132-inch 11-foot option is a separate assembly. Published dimensions and gameplay are supplier-stated reference facts, not measurements or tests of a supplied machine. Confirm the offered cabinet revision, condition, regional configuration and commercial terms in the quotation. Brand and function customization is typically available for orders of around 10–20 machines. Build your branded machine range with access to existing tooling for these machine types. Share your branding, required function changes, quantity for each selected model and destination. We will confirm the configuration, customization cost and production schedule in your quotation. Standard-machine and smaller-quantity enquiries are also welcome.

Model highlights

Tap the sensor pad with a foam mallet and control the light position in the win zone.
Barrel-shaped pedestal with foam mallet and circular sensor pad, tall narrow light tower, four colored round side panels, and two rectangular display windows.
The source maps the 108 in configuration to the 9 ft setup. A separate 132 in (11 ft) configuration is also shown; confirm the selected variant before quotation.
Request an exact-unit demonstration of controlled input, height and identity, mallet and sensor condition.
Brand and function customization is typically available for orders of around 10–20 machines.
Confirm the mallet, tether, pad and controller as one input assembly. Request approved replacement part IDs, any setup required after a change, and a record of the accepted operator settings for the quoted hardware revision.
Agree a sample of normal plays and record ready state, credit, permitted tap, light movement and final result in one continuous view. Ask the supplier to explain the selected zones and settings; this is a proposed response check, not force calibration.
Specify the proposed reader or acceptor and ticket, card-system or other supported award interface. Request a complete demonstration from paid credit through game result and awarded value to the venue record used for reconciliation.
Agree a documented check for interrupted play or an unavailable award device. Ask whether a pending result survives restart, how the next play is checked, and who authorizes and funds any customer adjustment; automatic compensation is not assumed.
Request revision-matched mallet, pad, tower and electronic part IDs, a spare-parts quote and operator/service instructions. Confirm consumables, warranty coverage and exclusions, the service contact, and responsibility for parts, labor and delivery costs.
Request net assembled weight separately from packed-piece dimensions and gross weights. Confirm which parts travel separately, handling points, arrival checks and assembly responsibility; review doorways, ceiling height and service access against the quoted drawing.
Ask for a dated quote separating equipment, accessories and spares, payment/award integration, commissioning, packing and freight. Confirm currency, quote validity and destination scope; separate production and dispatch dates from transit and expected arrival.

Your model checklist

Start with the right fit.

The selected 9-foot reference is listed as 53 L × 45 W × 108 H in. The separate 11-foot version is 132 in high. Confirm the supplied tower, mallet-use area and assembly route; the source does not provide a verified operating clearance or net assembled weight.

Game sequence and reward configuration
Confirm game sequence and reward configuration for the exact configuration in your quotation.
Consumables, sensors and service access
Confirm consumables, sensors and service access for the exact configuration in your quotation.
Player space and local operating requirements
Confirm player space and local operating requirements for the exact configuration in your quotation.

01More model details

Explore the configuration.

11 views

Controlled play in a venue — precision hammer light-target cabinet illustration — How might the controlled-play format fit an indoor venue?
Illustrative venue with a low controlled mallet action. This is not a customer installation or measured operating-clearance plan.

Low controlled mallet play — precision hammer light-target cabinet illustration — Does the demonstrated play match the intended controlled-skill format?
Illustrative player holding the tethered mallet close to the pad. This is controlled-skill play, not a claim of maximum-strength measurement.

Tower and display windows — precision hammer light-target cabinet illustration — Which tower and display revision will be supplied?
Four colored side panels and two blank display windows on the narrow tower. Display values and award settings require an exact-unit demonstration.

Controlled sensor-pad action — precision hammer light-target cabinet illustration — How should the mallet and sensor response be demonstrated?
An illustrative low mallet tap near the sensor pad. Agree the supplier-approved response check; no force calibration or performance result is implied.

Front payment and ticket area — precision hammer light-target cabinet illustration — Which payment and award interfaces need confirmation?
Close view of the front hardware layout. Confirm the specified acceptor or reader, award interface and working integration; compatibility is not established by this image.

Operator beside the reference cabinet — precision hammer light-target cabinet illustration — How should ceiling height and operating space be checked?
Illustrative adult beside the single 9-foot reference. Confirm the actual assembled height and site clearances; human stature is not measured from this image.

Closed front access panel — precision hammer light-target cabinet illustration — Where is the visible front access, and what remains to be documented?
Source-backed front exterior with a closed access panel and visible lock. Rear layout and internal service mechanisms are not shown.

Wider venue context — precision hammer light-target cabinet illustration — What venue access and circulation should the layout reserve?
Wide illustrative venue scene. Plan player movement, surrounding circulation and access from the quoted unit drawing; this image does not verify customer use or throughput.

Cabinet exterior — precision hammer light-target cabinet illustration — Which main exterior components define this cabinet?
Alternate exterior view of the single cabinet, including pedestal, tower, mallet, sensor pad and front hardware. Product illustration.

Exterior finish and fasteners — precision hammer light-target cabinet illustration — Which finish and service-part details should be checked on the offered unit?
Detail of exterior bands, fasteners and the closed access edge. The image does not establish material grade, manufacturing process or durability rating.

Complete cabinet selection — precision hammer light-target cabinet illustration — What should be included in the final machine brief?
Complete neutral cabinet illustration for configuration discussion. Request the selected height, packing, spares, payment arrangement and quotation.

Brand & function customization

Your machine.
Your direction.

Brand and function customization is typically available for orders of around 10–20 machines.

Precision Hammer Light Target model presentation

Branding direction. Final artwork and configuration are approved for your order.

Build your quote brief

What does your venue need?

Standard finishQuote the reference appearanceBrand & function customizationDiscuss artwork, color and function requirements

Venue / applicationPayment preferenceDestination electrical supplyInterface / artwork language optional

Estimated quantity

Precision Hammer Light Target

Standard finish · 1–5 machines

Quote this configuration Customize This Machine

Start from an existing machine design. Share the quantity for each model and required function changes. Available options, customization costs and production schedule are confirmed for your selected model and destination.

Before you commit

Specifications & order details.

From the floor plan to the freight quote.
Make the next decision with the right information.

Start with the source values

Key supplier specifications.

Supplier reference: Precision Hammer Light Target — source-specific reference configuration

Assembled dimensions — reference: 53 × 45 × 108 in (L/W/H). Supplier-stated; excludes unverified operating clearances.
Net weight — source status: The source does not state net assembled weight. Request exact-unit weight separately from boxed shipping weight.
Reference configuration — source: Precision Hammer Light Target — 9ft reference; 11ft separate
Players or modes — reference only: One player in the supplier reference; confirm the offered configuration in the quotation.

Reference data. Confirm the final dimensions, power supply, payment setup and model before ordering.

Full supplier specifications11 source fields

Reference configuration — source: Precision Hammer Light Target — 9ft reference; 11ft separate
Players or modes — reference only: One player in the supplier reference; confirm the offered configuration in the quotation.
Gameplay — supplier description: Tap the sensor pad with a foam mallet and control the light position in the win zone.
Net weight — source status: The source does not state net assembled weight. Request exact-unit weight separately from boxed shipping weight.
Electrical values — source status: 110V 5A / 220V 2.5A
Assembled dimensions — reference: 53 × 45 × 108 in (L/W/H). Supplier-stated; excludes unverified operating clearances.
Reference versus offered unit: Source values describe the identified reference. Exact supplier SKU, revision, condition and regional configuration remain unknown.
Payment and ticket configuration: Request the exact reader or acceptor and ticket interface with a matched working demonstration. No specific compatibility has been verified.
Packing and handling: Actual package sizes, gross piece weights, access requirements and assembly responsibility require a shipment-specific quotation.
Availability and quoted configuration: Confirm the offered cabinet, condition, lead time and delivery scope in the quotation; no local stock quantity is stated here.
Customization project: Brand and function customization is typically available around 10–20 machines. Share quantity per model and requested changes; exact scope, cost and schedule are quoted. This is not a fixed minimum order.

Confirm for your project.

Review these model questions with your venue, destination and order scope.

Space & installation1 question

Which tower and sensor replacement parts match the offered hardware revision?

Market & configuration1 question

Which destination voltage, frequency, plug, payment device and ticket arrangement will be demonstrated together?

Order & delivery4 questions

Can the foam mallet, tether and strike surface be inspected before packing?
What are the actual package sizes, gross weights, included spares and assembly responsibilities?
What price, lead time, warranty and support terms are stated in the dated exact-unit quotation?
For customization, what branding, function changes, quantity per model, destination and opening date should the quotation cover?

From model to delivery.

We bring your Precision Hammer Light Target configuration, custom requirements and delivery scope into one equipment proposal.

01
Model & configuration
Confirm the build, branding and local setup.
02
Packing & route
Agree packed measurements and the shipping scope.
03
Handover & support
Review unloading, available manuals and spare parts.

Request this model’s proposal Our supply network

From shortlist to quotation

Let’s build your quote.

Tell us where it’s going. We’ll review the machine, your selected options and the shipping scope.

Precision Hammer Light Target1–5 machinesStandard finishDiscuss with meConfirm for my marketEdit configuration

Chat on WhatsApp

Send an email Call our team

Redemption & skill